SS316 5.0mm Square Wire Multi Wave Spring

Custom High Precision Stainless Steel Wave Springs Serpentine Square Wire Wave Springs

A wave spring is a compression spring made of coiled flat wire with waves added along the coils to give it a spring effect. can be used in place of conventional round wire compression springs in applications requiring tight load deflection specification in space critical environments. Generally, they occupy 30-50% of the compressed height space of comparable round wire springs offering more deflection with the same load specifications. This not only provides for space savings but also smaller assemblies that use fewer materials, hence lower production costs.

Springs are manufactured from a single filament of flat wire formed in continuous precise coils with uniform diameters and waves. They are manufactured with either Plain ends (wavy) or Squared-flat ends (shim ends). Generally, 17-7pH is used as the standard material for wave springs. Careful material selection is required for operating environments such as high temperatures and corrosive media.

Wave springs are found in a wide variety of applications where structural considerations restrict the installation height, where uniform force distribution is needed and/or uniform rotational pressure is required over 360°. They are suitable for both static and slightly dynamic load applications. However, fatigue is critical while designing a wave spring for dynamic load applications. For higher life cycles a stronger spring is needed. Special solutions must be found for extremely dynamic applications since considerable stress on the sine wave curves can cause material abrasion at the contact point. Typical applications include connectors, clutches, valves, pumps, seals, medical equipment, etc.

Wave Springs product attributes

Application of Wave Springs

Aviation, automotive, motorbike, bicycle, automatic equipment, household appliance, medical device ,toy, telecommunication, computer, instrument and meter, furniture, electric tools, mold and other industries.

Characteristics of wave spring

(1) The rigidity range is large, the shock absorption ability is strong, and the concrete shape energy per unit volume is large.
(2) It has concrete stiffness characteristics. The stiffness can be corrected by changing the different combinations of peak height, width and thickness. The stiffness can also be adjusted by the number of combined pieces.
(3) Compared with disc springs, it has the advantages of high strength, good flexibility and strong impact resistance.
(4) The structure size is compact. Under the same physical parameters, the installation space is small.

Product packaging: generally a certain number of transparent plastic bags, and then by the carton packaging.Of course, if you have special requirements, we can also meet them.We have several regular partners: Bosch, Petra, Hitachi, dicks, dongfeng electric, etc.We have experience working with customers from all over the world, such as the United States, India and Australia.So you don't have to worry about transportation as long as your products are in our production range.

FAQ

Q: Are you a factory?
A: We are a 32-year-old factory, we pick up OEM orders.

Q: When can I get a quote?
A: We will quote you within 24 hours after receiving your inquiry. If you are in urgent need of price, please call us or let us know in your email address so that we can respond to your inquiry first.

Q: How to customize (OEM/ODM)?
A: If you have product drawings or samples, please send them to us and we can customize them according to your requirements. We will also provide our professional advice on products to maximize design performance..

Q:How long is your delivery time?
A: It usually takes 5~15 days, depending on the quantity you need. If time is urgent, you can arrange it.

How to choose a spring manufacturer? We can judge by inspecting the following 10 points of spring manufacturers:
1. Types of springs that can be produced.
Different types of springs require different production equipment. The more types that can be produced, the more complete the production equipment of the company.
2. Ask about the production accuracy of the spring.
The precision of producing springs represents the production technology capability of the spring factory. The higher the production precision, the more attention the spring factory pays to the quality of the products.
3. Whether there is a research and development team.
The R&D team is indispensable for an enterprise. The R&D team of the spring factory can make this enterprise develop in the direction of new processes and new technologies. ~Innovative ability
4. Whether the production equipment is imported.
Most of the domestic spring equipment is used to produce some non-important parts of the spring, the overall production accuracy is low, and there is a certain gap in product consistency. The higher the precision of the spring equipment, the higher the precision of the spring can be made.
5. Output of spring production.
The production output of springs represents the production capacity of this enterprise. The greater the production capacity, the stronger the supply capacity and the stronger the relative delivery guarantee.
6. Which manufacturers are the suppliers for?
As the saying goes, to marry a wife, you must choose the right person, and you also need to find a partner. For example, you are in the automotive industry, and Xinxiang Huispring Spring Co., Ltd. is a spring for the automotive industry. They directly supply the German Bosch company, so the product quality must be very guaranteed. This is very suitable for you. If you are making a ballpoint pen and you want an ordinary ballpoint pen spring, then this bright spring spring may not be suitable for you. You should choose an ordinary spring factory.
7. Whether there is a special testing department and whether the testing equipment is complete.
The inspection department is a necessary department of the spring enterprise. If no one supervises quality control, or quality control cannot use effective equipment for inspection, then no one would dare to use such products.
8. What is the defective rate of the spring produced? ,
The defective rate of springs of qualified spring manufacturers is generally between 5 and 12 parts per million. This data contains the data of nonconforming products detected by the manufacturer. The smaller the data, the stronger the accuracy and consistency of spring production.
9. Where are the raw materials of the springs purchased and whether they are inspected plate by plate.
The production process of the spring is very important, and the raw material of the spring is more important. For the same material, some material dealers sell it for 5 yuan, and some material dealers sell it for 10 yuan. Why is this? On the one hand, it is the consistency of the steel wire, such as some places where it is thick and some places, on the other hand, whether the composition of the spring material is evenly distributed and whether the content is qualified. The spring produced by unqualified spring raw materials is also unqualified, such as frequent breakage or deformation, and the spring load cannot be reached.
10. Whether it has the qualification certificate of the relevant industry.
For the spring industry, are some certificates very difficult to obtain, such as IATF16949 and GJB 9001C. These are very rare certificates. If this spring company has these qualifications, at least it proves to be very formal.
Finally, we still have to conduct on-site inspections and see how much the registered capital of this spring factory is, so as to avoid subsequent supply problems.