Place of Origin: | China |
---|---|
Brand Name: | HUIHUANG |
Certification: | ISO9001,IATF16949 |
Model Number: | Customize |
Minimum Order Quantity: | 1000 Pieces |
Price: | Discuss |
Packaging Details: | Carton+ Wood box |
Delivery Time: | Discuss |
Payment Terms: | T/T, D/P, L/C, Western Union |
Supply Ability: | 1000000 Piece/Pieces per Month According to the order |
Service: | OEM | Wire Diameter: | 0.1mm~9mm |
---|---|---|---|
Material: | Stainless Steel | Surface Treatment: | Plating , Spraying |
Shipping: | By Sea/air/express | Packing: | Carton+ Wood Box |
Usage: | Industrial, Industrial | Size: | Customized Sizes |
High Light: | 9mm Music Wire Torsion Spring,9mm spiral torsion spring,9mm torsion coil spring |
Manufacturer High Quality Double Helix Torsion Springs Farm Machinery Steel Torsion Springs
The common function of a Torsion Spring is to twist and then come back to its original position. The most familiar use of a torsion spring is on the old-fashioned clothespin. The rugged torsion spring joins the middle of the classic wood body. As we all have seen, when the user clasps open the clothespin, positions it over the clothes, and releases; the pressure of the torsion spring secures the clothes on the line.
Thousands of other torsion spring applications work much the same way; from safety pins and mousetraps to clipboards and garage doors. In any application where the need exists for rotational force, a torsion spring is likely to be right for the job.
A torsion spring is used when there is a need for rotational torque. There are two types of torsion spring designs – single and double, with single torsion springs being the most common type. When a Torsion Spring is assembled over a shaft, it is important to note that, as the spring is rotated in a normal direction, the inner diameter reduces which can cause binding on the shaft along with unnecessary stresses to the spring; it is critical to take into consideration the inside diameter of the spring along with the shaft size it works over. Typically the more malleable spring materials.
Torsion of torsion spring:
When the spring is twisted, the material is stretched or sheared, such as the calculation of torsion. Therefore, the limit of the twistable angle is caused by the failure of the material. When the material is plastically deformed, it cannot be restored. Therefore, it finally comes down to the tensile strength and shear strength of the material. Of course, the Von Mises stress calculated by the fourth strength theory is the maximum strength that the material can withstand. Combined with the length of the spring, the maximum allowable torsion angle can be calculated.
Torsion Springs product attributes
|
Application of Torsion Springs
Aviation, automotive, motorbike, bicycle, automatic equipment, household appliance, medical device ,toy, telecommunication, computer, instrument and meter, furniture, electric tools, mold and other industries.
Custom Torsion Springs
Torsion spring is the ultimate of the variant spring, from single torsion spring to double torsion spring special torsion spring, even the deformation of various torsion bars, which can be shaped according to design. Therefore, it is difficult to grasp the necessary information of the torsion spring when designing:
(1) Free length.
(2) Control diameter: (a) outer diameter, (b) inner diameter, (c) inner diameter of casing, or (d) outer diameter of round rod passed through.
(3) Wire size "wire diameter".
(4) Materials (type and grade).
(5) Number of turns: (a) total number of turns and (b) right-handed or left-handed.
(6) Torsion force: pounds deflected to a certain angle.
(7) Maximum deflection (angle from free position).
(8) The form of the end.
Please specify: material diameter (d), outer diameter (D), torsion arm length (L), free height (Lo), and other geometric dimensions, such as the guide moment (T 1 T 2 ... T j) and the corresponding sum Corresponding torsional angle (Ψ)
Custom Springs
Product packaging: generally a certain number of transparent plastic bags, and then by the carton packaging.Of course, if you have special requirements, we can also meet them.We have several regular partners: Bosch, Petra, Hitachi, dicks, dongfeng electric, etc.We have experience working with customers from all over the world, such as the United States, India and Australia.So you don't have to worry about transportation as long as your products are in our production range.
FAQ
Q: Are you a factory?
A: We are a 32-year-old factory, we pick up OEM orders.
Q: When can I get a quote?
A: We will quote you within 24 hours after receiving your inquiry. If you are in urgent need of price, please call us or let us know in your email address so that we can respond to your inquiry first.
Q: How to customize (OEM/ODM)?
A: If you have product drawings or samples, please send them to us and we can customize them according to your requirements. We will also provide our professional advice on products to maximize design performance..
Q:How long is your delivery time?
A: It usually takes 5~15 days, depending on the quantity you need. If time is urgent, you can arrange it.
How to choose a spring manufacturer? We can judge by inspecting the following 10 points of spring manufacturers:
1. Types of springs that can be produced.
Different types of springs require different production equipment. The more types that can be produced, the more complete the production equipment of the company.
2. Ask about the production accuracy of the spring.
The precision of producing springs represents the production technology capability of the spring factory. The higher the production precision, the more attention the spring factory pays to the quality of the products.
3. Whether there is a research and development team.
The R&D team is indispensable for an enterprise. The R&D team of the spring factory can make this enterprise develop in the direction of new processes and new technologies. ~Innovative ability
4. Whether the production equipment is imported.
Most of the domestic spring equipment is used to produce some non-important parts of the spring, the overall production accuracy is low, and there is a certain gap in product consistency. The higher the precision of the spring equipment, the higher the precision of the spring can be made.
5. Output of spring production.
The production output of springs represents the production capacity of this enterprise. The greater the production capacity, the stronger the supply capacity and the stronger the relative delivery guarantee.
6. Which manufacturers are the suppliers for?
As the saying goes, to marry a wife, you must choose the right person, and you also need to find a partner. For example, you are in the automotive industry, and Xinxiang Huispring Spring Co., Ltd. is a spring for the automotive industry. They directly supply the German Bosch company, so the product quality must be very guaranteed. This is very suitable for you. If you are making a ballpoint pen and you want an ordinary ballpoint pen spring, then this bright spring spring may not be suitable for you. You should choose an ordinary spring factory.
7. Whether there is a special testing department and whether the testing equipment is complete.
The inspection department is a necessary department of the spring enterprise. If no one supervises quality control, or quality control cannot use effective equipment for inspection, then no one would dare to use such products.
8. What is the defective rate of the spring produced? ,
The defective rate of springs of qualified spring manufacturers is generally between 5 and 12 parts per million. This data contains the data of nonconforming products detected by the manufacturer. The smaller the data, the stronger the accuracy and consistency of spring production.
9. Where are the raw materials of the springs purchased and whether they are inspected plate by plate.
The production process of the spring is very important, and the raw material of the spring is more important. For the same material, some material dealers sell it for 5 yuan, and some material dealers sell it for 10 yuan. Why is this? On the one hand, it is the consistency of the steel wire, such as some places where it is thick and some places, on the other hand, whether the composition of the spring material is evenly distributed and whether the content is qualified. The spring produced by unqualified spring raw materials is also unqualified, such as frequent breakage or deformation, and the spring load cannot be reached.
10. Whether it has the qualification certificate of the relevant industry.
For the spring industry, are some certificates very difficult to obtain, such as IATF16949 and GJB 9001C. These are very rare certificates. If this spring company has these qualifications, at least it proves to be very formal.
Finally, we still have to conduct on-site inspections and see how much the registered capital of this spring factory is, so as to avoid subsequent supply problems.